3000 Watt GVS Carbon Fibre Gutter Vacuum Cleaning System – Revamped!
Our 3000 watt GVS vacuum is a trusted great performing wet and dry vacuum cleaner that does exactly what you need it to do.
This machine has featured heavily in our videos where we have demonstrated how to upgrade the inlets to cyclonics. The machines have a factory standard airflow of 106 Lps / 6360Lpm. We have used in the videos an anemometer to test the airflow on this as a 38mm where approximately 3000cfm was achieved. After upgrading to the cyclonic entry, the anemometer displayed over 7000cfm thus not only reducing your chances of blockages with the larger inlet, but hugely increasing the airflow.
For the above reasons we no longer stock 38mm inlet industrial gutter vacuums. This vacuum with it’s great track record has been given a 2020 facelift. We have done away with the waste pipe which blocked up easily with leaves and debris and we have increased the inlet to the 72mm cast aluminium pull lever inlet.
This gutter cleaning machine is a great upgrade from a small 35L vacuum. The vacuum sits on a tilting tipping trolley for easy emptying which also features locking casters and dismounting clips to remove the drum when required. At a convenient size of 58x58x99cm this vacuum hardly takes up any room in your van.
The vacuum is supplied with 5m of hose though lengths of 10m and 15m are optional. Which length should go for?
Well, most residentials prefer a 5m hose for convenience. For those who clean larger properties and do not want to have to move the vac as often 10m is popular. 15m is preferred for industrial and large units where you wouldn’t want to move the vacuum as much.
This 3000w triple motor wet and dry vacuum can be run efficiently from mains power and we do recommend where no electricity can be accessed, a generator with a minimum of 5kva should be used.
Maintaining your gutter vacuum is very easy and regular cleans will always keep your tools in tip top condition.
Inside your gutter vacuum is a removable, washable cloth basket filter. We recommend on dry dusty gutters to keep this filter in to protect your motor head from fine particles. When the gutters are typically wet and full of water, slurry, sloppy leaves or wet vegetation, we suggest taking the cloth filter basket out. The wet sludgy matter will clog up the filter material reducing your suction performance. Cleaning this cloth filter basket is very simple, you can wash with a low pressure jet wash. Always make sure it has been air dried prior to reusing.
- Heavy Duty Full Steel Trolley
- 80 Litre Capacity
- Triple Motors 3000w
- 106Lps Air Flow / 6360Lpm (factory standard prior to upgrade)
- 100″ Water lift
- Wet & Dry sucks Liquids And Solids From Gutters With Ease
- 58cm x 58cm x 99cm
- Weighs 25kg
- No Bag is Required
- Supplied With 5 Meter Vacuum Hose
- One Man Operation
- No Mess
- Fast And Easy To Assemble
- Add An Extra Service To Your Existing Business
- Cleans Quickly And Easily
- Camera/Video also Available
- Work Safely From The Ground
The carbon fibre pole kit comes with an assortment of accessories for you including:
4 x 100% Carbon fibre poles
1 x Silicon curved head
1 x Hose cuff
1 x 35 degree dirt breaker nozzle
1 x Crevice nozzle for those tight access gutters
1 x Gulper nozzle uniquely designed to maintain the airflow
1 x Gutter vacuum pole carry bag
The Gutter Vacuum Systems’ carbon fibre poles are incredibly light and a great alternative to many on the market. They are 100% carbon fibre, 51mm in diameter and weigh just 360g per 1.5m section which means they are not only light but strong too.
They are a tapered pole and so interconnect by slotting together with no need for clamps. You can achieve the reach you need easily and with a simple twisting action they are easy to disassemble.
With this kit you also get our three gutter cleaning nozzles. A 35 degree nozzle, a restricted access crevice nozzle for those tight gutters and our GVS Gulper nozzle which has been designed to maintain the airflow, effectively breaking up debris at gutter height reducing the need to drop clumps to the ground. And if that wasn’t enough you also get our carry pole bag too featuring a side handle, shoulder strap and long zip.
The pole system itself is very easy to assemble. We recommend after use, that you flush your poles by sucking water from a bucket or bowl into your vacuum. This helps reduce the chance of residue building up within your poles. And to give them a quick wipe down with a cloth that’s had a light mist of PTFE or lubricating oil, this again helps reduce your poles from sticking after use.
Whether you are upgrading your equipment, adding an extra service and revenue stream to your business or you are looking for a fantastic package that offers you the set up you need, the GVS 3000 gives you that reassurance that not only are you no longer putting yourself or possibly others at risk with ladders, but you are clearing gutters efficiently.
All of our equipment come with a one year warranty.
These wet and dry vacuums suck liquids and solids from gutters with ease.
The larger inlet on our systems allows for the advantage of the 51mm diameter to run from the nozzle, poles and through the hose and into your vacuum. This preferred feature reduces the chances of blockages repeatedly found from smaller systems which struggle with larger objects such as moss, some broken pointing, roof tiles, and other vegetation. No bag is required, the debris enters drum at speed, circumnavigating inside and falling to the bottom evenly distributed.
The vacuum is supplied with a minimum of 5m hose. Only one operative is required to set up, use and dismantle. It’s a quick and easy set up which adds the extra service and revenue stream to your business. There is no mess as the contents are within your drum. This system means you are no longer putting yourself or your staff at risk going up and down ladders. You can work safely from the ground.