Menu
Roof scraping just got easier! Our roof scraping head and blades kit features a multi directional head with our very own GVS exclusive quick release mechanism engineered for your efficiency and ease of use. Scraping moss from roofs using one of the 10 blades from this kit, securely fitted with our quick release mechanism or thumbscrew – means you have no other screws or fitments to lose and replace!
Blades are all made from 3mm stainless steel.
Flat – (200mm)
Flat Nylon – (200mm)
Redland Renown – (300mm)
Redland Regent – (300mm)
Redland Grovebury – (300mm)
Marley Wessex – (300mm)
Marley Mendip – (300mm)
Marley Ludlow Plus – (200mm)
Marley Bold Roll – (300mm)
Hip 1/3 – (300mm)
OPTIONAL ADD-ON:
GVS Pro-30 Telescopic Pole Features
100% carbon fibre
Six sections in matt finish
Metal Clamps
Pro-30 pole weighs just 1.82kg
5.8ft collapsed length
£206.40 – £563.52
Roof scraping just got easier! Our roof scraping head and blades kit features a multi directional head with our very own GVS exclusive quick release mechanism engineered for your efficiency and ease of use. Scraping moss from roofs using one of the 10 blades from this kit, securely fitted with our quick release mechanism or thumbscrew – means you have no other screws or fitments to lose and replace!
Blades are all made from 3mm stainless steel.
Flat – (200mm)
Flat Nylon – (200mm)
Redland Renown – (300mm)
Redland Regent – (300mm)
Redland Grovebury – (300mm)
Marley Wessex – (300mm)
Marley Mendip – (300mm)
Marley Ludlow Plus – (200mm)
Marley Bold Roll – (300mm)
Hip 1/3 – (300mm)
OPTIONAL ADD-ON:
GVS Pro-30 Telescopic Pole Features
100% carbon fibre
Six sections in matt finish
Metal Clamps
Pro-30 pole weighs just 1.82kg
5.8ft collapsed length
Roof scraping moss removal photos courtesy of Partridge Exterior Cleaning.
The head is compatible with a wide variety of EU threaded end window cleaning poles so you can scrape from the safety of the ground and also from elevated platforms.
GBReally good build quality, looking forward to using this set I think it’s got all you need to get started!
GBThis head with the ally conda, is super heavy and exhausting to use the head gets clogged up with grit and dirt and mine has fallen apart losing all the locking mechanism, once grit gets in the head the screws will jam and can shred. The ally conda is heavy and the clamps are hopeless coming lose all the time at one point it came lose whilst I was on scaffold and the bottom section came out entirely as you have to keep tightening the nut, grit and dirt gets in the pole and scratches it to bits as well, get a carbon one it'll save your arms and back the ally conda isn't nice to use in my opinion I ended up adapting the head to fit my unger carbon pole much lighter better clamps too
GBWhat a amazing piece of kit to have in the arsenal. Ordered and next day was with me. GSV showing others how it should be.
GBThe scraper was fairly good although I did have to fix it within a couple of days of use as the plastic sleeves at the top of the poles slid up stopping the poles from remaining in place and allowing them to move , it took me about ten min to strip it down and push the sleeves back into the little holes and tighten them Up, I’ve had to do it again since. The other thing is the pole at full extension is very heavy and also very flexible, I’ve not worked out whether that’s a good thing or not but it’s almost impossible to lift it to the top of a roof without laying it on the roof, so extending across a gap would be a nightmare. It performed the job though so it got me started.
