Menu
Portable heavy duty chemical pump box for exterior cleaning specialists who are looking to apply pre-mixed required ratio biocides, soft washing sodium hypochlorite and TFR etc to exterior surfaces. Remove moss, algae, and lichen from hard surfaces, roofs, walls and render.
The box which is set up to use includes the chemical inlet hose, charger whether you choose to have the 50Ah battery included or not and also features a storage tray for those applicators, fan jets, full cones and other required spray nozzles and accessories.
CONTROLLER CALIBRATION
Please consider that in variable conditions and situations, calibration should take place on each set up.
AFTER USE
After use you must flush through the system, we would suggest for a good 10 minutes with fresh water. It is important to flush the pump and chemical lines to provide your equipment with longevity. Failure to do this will cause corrosion to the pump.
CHEMICAL USAGE
You should always premix your chemical to the ratio required.
Specific features
V16 Controller (Please scan the QR code on the controller for calibration prior to using)
Allows you to vary the pump flow rate from 0-99%. Automatically pauses the flow when dead-end (eg from a pole valve) is detected and restarts it when dead-end has been removed. Indicates when the pressure switch has operated, and also the battery condition (voltage). Auto calibration. IP65 box. Supplied with chemical inlet hose, connect your own hose to outlet.
Pump
12v
5.6 Lpm Pump
100 Psi/6.8 Bar
Self priming
Run dry capable
Viton seal pump
Battery
12v, 50Ah
Wet Cell Flooded Lead Acid Battery with Advance Calcium+ Alloy Technology
Please charge battery fully before first use
Charger
5Ah
6-12v
SAE Crocodile connectors and O ring terminal crimps
Dimensions and Weight Specifications
Box measures 47cm (W) x 38cm (D) x 31cm (H)
Without battery 6kg
With battery 14kg
Inlet top
Outlet Bottom
Charge port on the rear.
Premix
£550.00 – £660.00
Portable heavy duty chemical pump box for exterior cleaning specialists who are looking to apply pre-mixed required ratio biocides, soft washing sodium hypochlorite and TFR etc to exterior surfaces. Remove moss, algae, and lichen from hard surfaces, roofs, walls and render.
The box which is set up to use includes the chemical inlet hose, charger whether you choose to have the 50Ah battery included or not and also features a storage tray for those applicators, fan jets, full cones and other required spray nozzles and accessories.
CONTROLLER CALIBRATION
Please consider that in variable conditions and situations, calibration should take place on each set up.
AFTER USE
After use you must flush through the system, we would suggest for a good 10 minutes with fresh water. It is important to flush the pump and chemical lines to provide your equipment with longevity. Failure to do this will cause corrosion to the pump.
CHEMICAL USAGE
You should always premix your chemical to the ratio required.
Specific features
V16 Controller (Please scan the QR code on the controller for calibration prior to using)
Allows you to vary the pump flow rate from 0-99%. Automatically pauses the flow when dead-end (eg from a pole valve) is detected and restarts it when dead-end has been removed. Indicates when the pressure switch has operated, and also the battery condition (voltage). Auto calibration. IP65 box. Supplied with chemical inlet hose, connect your own hose to outlet.
Pump
12v
5.6 Lpm Pump
100 Psi/6.8 Bar
Self priming
Run dry capable
Viton seal pump
Battery
12v, 50Ah
Wet Cell Flooded Lead Acid Battery with Advance Calcium+ Alloy Technology
Please charge battery fully before first use
Charger
5Ah
6-12v
SAE Crocodile connectors and O ring terminal crimps
Dimensions and Weight Specifications
Box measures 47cm (W) x 38cm (D) x 31cm (H)
Without battery 6kg
With battery 14kg
Inlet top
Outlet Bottom
Charge port on the rear.
Premix
