Full Description Below
£645.00 – £745.00
Our 3600 watt GVS-36 gutter vacuum is a well trusted, great performing gutter vacuum that does exactly what you need it to do pulling no punches with a powerful suction performance and with three motors you choose the power you need.
The GVS-36 has a powerful 10,000Lpm suction performance developed from our years of hands on experience. No plastic inlets and blockage causing reductions in diameter. This makes the GVS-36 a great cost effective system. The GVS-36 sits on a choice of full steel, tilting tipping trolley for easy emptying. Simply remove the head and position safely on the ground then tilt the drum and empty the contents. The trolley has two front locking casters and positional unlocking dismounting clips. The float valve is provided with a large cloth filter and retaining basket.
The original one handled frame is a convenient size of 58cm(W) x 58cm(W) x 99cm(H), this vacuum hardly takes up any room in your van, it features rear plastic wheels and a low point tipping bar.
The two handled all terrain trolley boasts large rear puncture proof wheels and a mid point tipping bar for easy emptying. This is a larger frame at 54cm(W) x 70cm(W) x 115cm(H).
The GVS-36 is supplied with 51mm diameter, 5m length of universal hose and a 51mm hose cuff, though additional lengths of hose can be conveniently added later using a hose joiner and additional hose cuff for those bigger jobs.
This 3600w triple motor gutter vacuum can run efficiently direct from mains power and we do recommend where no electricity can be accessed, a generator with a minimum of 5.5kva.
Maintaining your gutter vacuum is very easy and regular cleans will always keep your tools in tip top condition.
Inside this gutter vacuum is a removable, washable cloth filter with a retaining basket. We recommend on dry dusty gutters to keep this cloth filter in to protect your motor head from fine dusty particles. When the gutters are wet, full of slurry, sludge, sloppy leaves or wet vegetation, we advise hosing the filter off on site for retaining suction performance as the wet sludgy matter will clog up the filter material reducing your suction performance. If you do remove the cloth filter you must ensure the float valve is free of muck at all times. The filter is there to protect the float valve on wet application thus protecting your motors.
The cloth filter MUST be fully dry for dry use.
Cleaning this cloth filter is very simple, you can wash with a low pressure jet wash or use a stiff brush when dry. Always make sure it has been air dried prior to reusing.
The GVS-36 is a blockage busting, high performance addition for those who already have our 51mm gutter vacuum poles and require an industrial system for those larger jobs. It is available separately with pole packages.
Really good piece of equipment I have only used two motors so far as the suction is really powerful. I do alternate which one I use as well. Well worth buying.